Use the transient voltage suppression diodes (abbreviated TVS)

 2 Use the transient voltage suppression diodes (abbreviated TVS)

LED Bulb

Transient voltage suppression diode is a diode in the form of high-performance protection devices. When it's poles by reverse transient high-energy impact, able to power 10 to the minus 12 seconds, the speed of a very short time, so that the impedance between the poles themselves immediately reduced to low resistance, absorbing up to several kilowatts of power surge , the  LED Strip voltage between the poles of clamping voltage at a predetermined value, the effective protection of the electronic circuits of precision components. Transient voltage suppression diodes with fast response time, transient power, low leakage current, breakdown voltage deviation consistency, easier to control the clamping voltage, no damage limit, small size, etc..

But in actual use was found to meet the requirements to find voltage TVS device is not easy. LED light source damage is mainly because current Ambassador chip caused by overheating. TVS can  LED Module not only detect overvoltage overcurrent detection. To select the appropriate voltage protection point is difficult to grasp, this device can not produce it is difficult to use in practice.