News
15/03/2013 09:29
6.LED automatic loading rack is automatically loaded rack is in fact a combination of the two LED Lamps Bulbs steps, the first point in the LED bracket on the silver plastic (plastic insulation) of glue stick (dispensing) and install the chip, then the LED chip pick up with a vacuum...
15/03/2013 09:29
4.LED prepared glue and dispensing the contrary, prepare gum is prepared glue first silver plastic LED Downlights coating on the the LED back of the electrode, and then installed in the back with a silver plastic LED LED bracket. The prepared glue the efficiency much higher than plastic, but...
15/03/2013 09:17
Purposes 7.LED Sintering Sintering is Silver glue curing the sintering temperature monitoring is MR16 LED Lamp required to prevent the batch adverse. The silver plastic sintering temperature is generally controlled at 150 ℃8mm LED Flexi, the sintering time is 2 hours. According to...
14/03/2013 08:56
Step 5: electricity, communication numbers.
LED Downlights Transformer connected to a 220V main power, and then using an air switch and time switch;
Unified control LED digital tube (LED guardrail lamps) energized; then on the master plug on 220V power.
Step Six: system debugging LED Strip...
14/03/2013 08:55
Note:
LED Lamps Bulbs 1, LED digital tube can not be the normal procedure, confirm tube whether the signal line, not the operation of the tube replaced, if returned to normal, confirm tube problem, have done another sub control try can not solve installation problems, please contact the...
14/03/2013 08:53
3 monochrome or internal control fence light installation is relatively simple, and directly MR16 LED Lamp connected to the corresponding power line; would also like to mention here is the 8mm LED Flexi internal control ID LED guardrail light installation: Internal Control Number...
13/03/2013 10:55
The first point to meet the individual needs of the people lighting
LED Downlights LED modular lighting design brings convenience, by the designers fully rational layout, the LED is in good working condition. The LED lighting products to meet individual dwarfs traditional light source the,...
13/03/2013 10:55
LED product development is the five-point
MR16 LED Lamp Introduction Technology is today, the public view of every human advances in technology, no not every innovation, representatives say of innovation and technology in the 21st century, the LED products is absolutely worthy of the name,...
13/03/2013 10:55
More bluish light color, the higher the color temperature; reddish lower the color temperature. LED Lamps Bulbs Among painting light color of the day in tandem with time changes: 40 minutes after sunrise light color than yellow, the color temperature of 3,000 K; midday sun white, rose to...
12/03/2013 09:17
Second, the Feature Description LED Downlights
The use of high-voltage power CMOS process
To output port Withstand 24V
Luminance 256 adjustable
Serial interface cascaded interface LED Strip Lights
Oscillation mode: built-in RC oscillator and clock synchronization based on the data line...
