LED Flexi Strip
31/10/2013 10:12
1, if your display wall installation location is the place, to see how much the display can bulge, if LED Bulb the position of protruding wall one meter is recommended according to the area size selection fan, fan mounting position on the screen side turn arranged on top,
if you buy a display of 80 square ph16 outdoor full color LED display, it means that you buy 6 sets of fans to about 600mm in diameter axial fan, the fan is pumping Wangwaimian kind, and when the fan installed to ensure that there are nets to prevent the maintenance of technical personnel in the maintenance screen display when the clothes else sucked according bodily harm, in order to waterproof aluminum plate to the outside fan outlet fitted aluminum blinds.
The display can also be wall-mounted air conditioning, air conditioning to ensure a position to put the hosts, does not affect the overall appearance of the wall. There is a choice of air-conditioning requirements, the most commonly used is 1.5P,
2P and 3P air conditioning largest northern city of 12 square 1P air conditioning calculations; southern city calculated using the 9 square 1P air conditioning. If the LED outdoor display area is relatively large, air-conditioning went factory direct custom, if the area is not the case will go to the store to buy, but there is a caller display HVAC compensation function.
2, if the LED display installation method is the use of the column, it is best to use fan cooling fan mounted on the big screen at the back of aluminum plate, preferably up by, made in the form of blinds so when it rains rain water does not enter inside the display, if it is double-column, right in the middle of the double column open several shutters, windows are the Better Business inlet, above the exhaust fan is such a complete air convection cooling effect makes better.
