LED Strip

04/11/2013 09:47

( 1 ) spread-spectrum communication technology which is much larger than the signal bandwidth  LED Downlight occupied by the preaching of the information required minimum bandwidth . Band broadening is achieved by coding and modulation methods to achieve, nothing to do with the information and data transfer . The receiver uses the same spreading code transmitter for coherent demodulation to recover the information transmitted . According to Shannon 's theory about the channel capacity :

 

C = WLog2 (1 ten P / N).

LED Strip 

Where : C is called channel capacity ; W is band width ; P / N is the signal -to-noise power ratio . This scheme: maintaining information capacity C in the same conditions , can have a different W and P / N, i.e. , if the frequency is widened , the noise in the channel may be relatively low, and can achieve the same channel capacity ( effective information transmission rate ) . Even in the case of submerged by the noise signal , as long as a corresponding increase in the signal transmission bandwidth , it is possible to achieve a reliable transmission purposes . Spread Spectrum Communication is based on this principle .

  GU10 

( 2 ) dynamic routing method requires the establishment of a centralized control center routing table and the pheromone table , each terminal establishes sub routing table , concentrators, and all electrical terminals should establish their own distance table to record directly communicate with another terminal electrical distance. Algorithm consists mainly of route discovery and route maintenance in two parts , the following were described.